With the TrainLine Modem TLM, up to 500 MBit/s can be transmitted via a vehicle coupling or a vehicle joint. For this purpose, existing lines crossing the vehicle, such as those of the train LF, IBIS or other 24V control lines, are used. The use of unused coupling contacts is also possible.
On the front side of the TLM, depending on the version, there is a M12D or x-coded connector to connect the device to the vehicle network. After installation, no further commissioning or configuration such as the setting of MAC or IP addresses is necessary. If necessary, the transmitting and receiving power can be parameterized in order to effectively bridge particularly large and small distances.
For details check our download area.